Learn how to turn a few disposable coasters into a cute Christmas garland, in less than 20 minutes!
With your Xyron Creative Station and some $1 coasters (thanks Target Dollar Spot!) you can create this fun and festive garland in just a few minutes! {FTC disclaimer: I received some of this product free of charge. This post contains affiliate links which means I may make a few pennies if you buy something!}
SUPPLIES NEEDED:
- disposable coasters
- Xyron Creative Station or Creative Station Lite
- twine
Do you want to order your Xyron products from amazon.com? Then check out my Adhesives & Fixatives page!
HOW TO MAKE A QUICK CHRISTMAS COASTER GARLAND:
Separate the coasters in to two piles. Run one pile through your Xyron machine and remove the clear film.
Take the second pile of coasters and lay them pattern side down on your work surface.
Lay the twine across the center of the coasters (leaving a “tail” on each end), then peel the adhesive coasters from the Xyron backing one at a time and match/adhere them to the non-adhesive coasters.
Hang and enjoy! This would also be a fun and easy project to do with the kids!
Even though this project was super easy to create, I did want to bring up one thing in regards to the disposable coasters.
If you can’t find these disposable coasters at Target, you can still create this project! All you would need to do is use another brand of disposable coasters, which you can find either in stores or online.
So, if you can’t find these Target disposable coasters, then I would recommend Googling the following terms to make your search a bit easier: ”disposable coasters”, or ”disposable coasters for drinks”.
Also, while shopping at the store, you may want to look in the party section to see if there are disposable coasters available.
Quick Christmas Coaster Garland
Materials
- disposable coasters
- Xyron Creative Station or Creative Station Lite
- twine
Instructions
- Separate the coasters in to two piles. Run one pile through your Xyron machine and remove the clear film.
- Take the second pile of coasters and lay them pattern side down on your work surface.
- Lay the twine across the center of the coasters (leaving a “tail” on each end), then peel the adhesive coasters from the Xyron backing one at a time and match/adhere them to the non-adhesive coasters.
- Hang and enjoy!
Follow for more!
Make sure to follow us on Facebook, Pinterest, Instagram, Twitter and Tiktok for all the latest craft projects! Plus you can shop all our favorites over at Kingston Crafts!