Michaels Bunny Banner Tutorial

Learn how to turn foam bunny shapes and a few pom-poms into the perfect Bunny Banner, just in time for Easter!

Last week I hosted my first Facebook Live tutorial – and in addition to sharing a glass of wine with everybody we created this fun (and easy) Bunny Banner using a few supplies from Michaels and a Xyron Creative Station! I’ve shared the video below and am including the supply list and a written tutorial here. The best part about this? You can take these same techniques and create a banner for any theme! {FTC Disclaimer: there are some affiliate links in this blog post – which means I might make a few pennies if you buy something!}

SUPPLIES NEEDED:

• one package of foam bunny shapes – you can buy these from any mass craft store
• assorted 1.5″ pom poms
• Xyron Creative Station with 9″ Permanent Refill
• two yards of ribbon
• liquid adhesive

HOW TO MAKE BUNNY BANNER:

Divide package of foam bunnies in to two equal piles – making sure there are the same number of each color of bunnies in each pile.

Run one pile through the Xyron Creative Station. Set aside.

On your work area lay the bunnies out about 2″ apart.

Lay the ribbon on top of the bunnies across the ears. Make sure you’ve left a 6-8″ “tail” of ribbon on both ends of the banner.

Peel the Xyron adhered bunnies off one at a time and match them to the same color bunny, then press to adhere. Repeat until the banner is finished.

Use liquid adhesive to adhere a pom pom to each bunny and allow to dry.

Now, if you need some written instructions, then we have you covered! Check out the instructions box below to see all of the details for this project. Plus, you can even print them or pin them to your favorite Pinterest board!

Print This Pin This Rate This

Michaels Bunny Banner Tutorial

Learn how to turn foam bunny shapes and a few pom-poms into the perfect Bunny Banner, just in time for Easter!

Author: Beth Kingston

Materials

• one package of foam bunny shapes – you can buy these from any mass craft store
• assorted 1.5″ pom poms
• Xyron Creative Station with 9″ Permanent Refill
• two yards of ribbon
• liquid adhesive

Instructions

• Divide package of foam bunnies in to two equal piles – making sure there are the same number of each color of bunnies in each pile.
• Run one pile through the Xyron Creative Station. Set aside.
• On your work area lay the bunnies out about 2″ apart.
• Lay the ribbon on top of the bunnies across the ears. Make sure you’ve left a 6-8″ “tail” of ribbon on both ends of the banner.
• Peel the Xyron adhered bunnies off one at a time and match them to the same color bunny, then press to adhere. Repeat until the banner is finished.
• Use liquid adhesive to adhere a pom pom to each bunny and allow to dry.

IF YOU ARE LOOKING FOR ANOTHER Easter PROJECT TO MAKE, THEN CHECK OUT OUR bunny bookmarks!